Heatsink Metal Flow Video –
Kinetic Die Casting Company (www.kineticdc.com) uses metal flow software to check die casting tooling metal flow into a die casting mold making two cavities of a Heat Sink Part
(Metal Flow into Mold or Die Casting Tooling).
This is an Aluminum Heat Sink Die Casting Part for the lighting industry.
Two cavity aluminum heat sink die casting molds. This 5 seconds of video happens in a small fraction of a second as the metal is injected under extreme pressure. The metal flows very rapidly into a die casting mold using 2,000 pounds per square inch of hydraulic pressure that is accelerated in high shot assisted by 700 pounds of high pressure nitrogen gas inside a die casting machine.
818-982-9200 (music provided by YouTube)
Kinetic Die Casting Company
E-mail email@example.com / 818-982-9200 / 800-524-8083 Toll Free / 818-982-0877 Fax
6918 Beck Avenue, North Hollywood, California USA 91605,
Kineticdc makes: Die Casting Parts Aluminum Heat Sinks
Kinetic Die Casting Company 6918 Beck Avenue North Hollywood California 818-982-9200
No longer interested email from Kinetic Die Casting Blog?. Please email firstname.lastname@example.org to unsubscribe